Where to Sell Scrap Metal in Broward County: A Neighborhood Guide

You can sell scrap metal across Broward County at licensed scrap yards that buy ferrous and non-ferrous metal by weight and pay the same day. Scrap City, a family-owned recycler serving South Florida for over 50 years, buys copper, aluminum, brass, steel, stainless and more at its Pompano Beach yard (2220 N Powerline Rd) — an easy drive from Fort Lauderdale, Coral Springs, Deerfield Beach and the rest of Broward — with free pickup available for larger loads.

If you’ve got a garage full of copper pipe, a trailer of aluminum from a renovation, or a pile of steel from a fence tear-out, the question is always the same: where do you actually take it in Broward County, and who pays a fair price? This guide breaks it down by area, explains what yards buy, walks through walk-in versus pickup, and covers exactly what to bring so you get paid on the spot.

Broward is a big county — more than 30 municipalities stretching from the coast out to the edge of the Everglades — so the most convenient place to sell depends on where you are. Scrap City’s main yard sits in Pompano Beach, centrally located in eastern Broward and a quick drive from most neighborhoods, with a second yard up in Delray Beach for sellers in the far north of the county and southern Palm Beach.

Before we get into the map, one principle is worth stating up front: where you sell matters less than how you arrive. A clean, sorted load brought to any reputable yard will out-earn a mixed, dirty pile taken to the “best” yard in town. Distance, hours and pickup options decide convenience; sorting and grade decide your payout. Keep both in mind as you plan the trip.

Where to sell scrap metal across Broward County

Here’s a rough guide by area, based on the drive to Scrap City’s Pompano Beach yard at 2220 N Powerline Rd, Pompano Beach, FL 33069.

• North Broward (closest): Pompano Beach, Deerfield Beach, Lighthouse Point, Coconut Creek, Margate, Coral Springs and Parkland are all a short hop from the yard.
• East / Central Broward: Fort Lauderdale neighborhoods like Victoria Park, Coral Ridge, Rio Vista and Las Olas, plus Oakland Park, Wilton Manors and Lauderdale-by-the-Sea, are an easy drive east of I-95.
• Central / West Broward: Tamarac, Sunrise, Lauderhill, Plantation, Davie and Cooper City reach the yard quickly via Commercial Boulevard, Atlantic Boulevard or the Sawgrass Expressway.
• South Broward: Hollywood, Hallandale Beach, Dania Beach, Pembroke Pines and Miramar are a bit farther — for a small load the drive is fine, but for anything heavy, pickup usually makes more sense.

If you’re up in northern Broward or near the county line, the Delray Beach yard at 1865 Dr Andres Way, Delray Beach, FL 33445 may actually be closer. Either way, the smart move is to call ahead for higher-value loads so you know the day’s price before you load up the truck.

What scrap yards buy — and what’s worth the most

Almost any metal has value. Broadly, non-ferrous metals (those without iron) pay the most per pound, while ferrous metals like steel pay less per pound but add up by weight. Here’s a quick orientation; for current numbers, see our guide on how much scrap metal is worth per pound.

Metal	Common Broward sources	Relative value
Copper	Plumbing, A/C lines, wiring, roofing	Highest per lb
Brass	Faucets, valves, fittings, fixtures	High
Aluminum	Gutters, screen enclosures, siding, cans, wheels	Moderate
Stainless steel	Sinks, appliances, railings	Moderate
Lead	Batteries, weights	Moderate
Steel & iron (ferrous)	Appliances, fencing, structural, rebar	Lower per lb, high by volume

Not sure what you have? The team grades your load at the scale, and our metal recycling pages break down each type. A magnet is also your friend — if it sticks, the metal is ferrous (steel or iron); if it doesn’t, you’re likely holding more valuable non-ferrous metal.

Common scrap sources around Broward homes and businesses

A lot of the metal that comes through a South Florida yard starts as everyday projects. Home renovations produce copper plumbing, old faucets and brass fixtures; re-roofing and re-screening jobs yield aluminum and steel; and replacing an air-conditioner leaves behind a condenser full of copper and aluminum. Pool-cage and screen-enclosure rebuilds — extremely common in Broward — are almost pure aluminum, and old hurricane shutters add even more.

On the commercial side, contractors, electricians, plumbers and remodelers across the county generate steady volumes of mixed metal, and Florida’s boating culture adds marine aluminum, stainless and bronze to the mix. Whatever the source, the same rule applies: the cleaner and better-sorted it arrives, the more it’s worth — and the bigger the load, the more sense it makes to schedule a pickup instead of hauling it yourself.

Walk-in vs. free pickup — which is right for you?

Walk-in is best for small to medium loads. Drive to the Pompano Beach or Delray Beach yard during business hours — Monday to Friday 8:00 a.m. to 4:30 p.m., or Saturday 8:00 a.m. to 12:30 p.m. — your material is sorted and weighed, and you’re paid before you leave.

Scheduled pickup is best for large, heavy or recurring loads: contractor and demolition debris, a big renovation cleanout, or a business clearing out metal. Pickup is free for qualifying volumes, and for ongoing commercial accounts we can place containers on site. If hauling the load yourself would mean multiple trips or renting a trailer, pickup is almost always the better call.

What to bring when you sell scrap metal in Florida

• A valid government-issued photo ID. Florida law requires scrap metal dealers to record seller identification for regulated metal transactions.
• Sorted metal. Separating copper from brass from aluminum — and keeping copper grades apart — earns a higher, cleaner price.
• Clean material where practical. Stripping insulation off copper wire or removing steel attachments can move metal into a higher-paying grade. See our guide on how to prepare your scrap for the best price.
• The right vehicle. A truck or trailer for heavy loads; for very large volumes, book a pickup instead.

How you get paid

Reputable yards pay the same day, by cash or check depending on the load and local rules. Under Florida law, any payment over $1,000 for regulated metal must be made by check payable to the seller (FL Statute 538) — a rule designed to keep the scrap stream clean and protect honest sellers. Bring your ID, and you can usually be weighed, graded and paid in one visit.

What to expect at the scale

If you’ve never sold scrap before, the process is simple. You pull in, the yard directs you where to unload, and your material is sorted by type and grade. Ferrous and non-ferrous metals are separated first, then the non-ferrous is graded more finely — clean copper apart from dirty copper, for example. Everything is weighed on certified scales, and the weight multiplied by the day’s price for each grade becomes your payout.

Two simple habits improve your result: arrive with your metal already sorted, and come earlier in the day — especially on Saturdays, when the yard is open only until 12:30 p.m. For very large or commercial loads, calling ahead lets the team have the right equipment and a container ready, which means less waiting for you and a smoother weigh-in.

Why sell to Scrap City

• Over 50 years serving South Florida’s residents, contractors and industrial community.
• Family-owned, with a 4.8-star reputation and thousands of reviews.
• Two locations — Pompano Beach and Delray Beach — covering Broward and southern Palm Beach.
• Bilingual (English / Spanish) team, certified scales, and free pickup for larger loads.

Selling regularly? Consider a commercial account

If you generate scrap metal regularly, it pays to build a relationship with a local yard. This is especially true for contractors, HVAC companies, plumbers, property managers, and machine shops. A long-term partnership can provide recurring pickups, on-site containers, and a dedicated point of contact. These services save time and simplify operations.

Working with the same recycler also makes it easier to track earnings. You can monitor revenue by month or quarter and identify trends. For contractors clearing job sites every week, the benefits add up quickly. Instead of making occasional trips, scrap becomes a consistent and predictable source of revenue.

Even during a home renovation, scrap metal can have value. Before you begin, check the scrap yard’s hours and ask about current prices. If you need pickup service, confirm the minimum quantity required. A little planning can make a big difference. Rather than treating scrap as waste, you can turn it into extra cash from a project you were already doing.

What Sellers Often Ask

Where can I sell scrap metal in Broward County?

At a licensed scrap yard that buys by weight. Scrap City’s Pompano Beach yard (2220 N Powerline Rd) serves Fort Lauderdale, Coral Springs, Deerfield Beach, Pompano and the rest of Broward, with a second yard in Delray Beach for the far north of the county.

Who buys scrap metal near Fort Lauderdale?

Scrap City’s Pompano Beach location is a short drive from Fort Lauderdale and buys copper, aluminum, brass, steel, stainless, lead and more, with same-day payment.

Do I need an ID to sell scrap metal in Florida?

Yes. Florida law requires dealers to record a valid government-issued photo ID for regulated metal transactions (FL Statute 538), so bring one.

Do scrap yards pay cash?

Yes, the same day, by cash or check depending on the load. In Florida, payments over $1,000 for regulated metal must be made by check to the seller.

Can someone pick up my scrap metal in Broward?

Yes — Scrap City offers free pickup for qualifying loads across Broward and southern Palm Beach. Smaller loads are best brought to either yard.

What’s the closest scrap yard if I’m in south Broward?

From Hollywood, Hallandale or Pembroke Pines the Pompano Beach yard is a reasonable drive for small loads; for heavy loads, ask about pickup so you don’t make multiple trips.

Ready to sell? Visit Scrap City in Pompano Beach or Delray Beach, or call / message us at (+1) 954 330 9472 for the day’s price and to schedule a free pickup for larger loads.